|
Description
Many pneumatic system components and tools require oil lubrication for proper operation and long service life. This lubricant is normally carried by the air stream.
A properly sized and adjusted mist-type lubricator installed within 25 feet of the toll will ensure the proper amount of oil.
|
Links
Technical Info
Airtac air lubricators have:
1. 1/8 ", 1/4", 3/8", 1/2", 3/4" , 1" NPT Female connections.
2. 106 CFM ( 3000L / min ), 140 CFM ( 4000L /min ), 212 CFM ( 6000L / min )
353 CFM ( 10000L / min ) flows are available.
3. Interchangeable with SMC AL30, AL40, AL60 air lubricators
There are five main attributes to consider when selecting a Lubricator:
•Flow Capacity - measured in CFM or cubic feet per minute
•Inlet Pressure Rating - measured in PSI or pounds per square inch
•Port Size - thread size of the regulator
•Minimum Flow Rate - refers to the minimum flow required to entrain the oil into the air flow.
•Bowl Capacity - will affect the time between filings, which will impact maintenance schedules.
•Bowl Material - ( metal or plastic ) should be chosen based on environment and exposure to chemicals.
•Refilling System Capability - the ability to re-fill under pressure greatly simplifies maintenance.